小米各机型参数对比2

Xiaomi AX1800, AX3600, AX6000, AX9000 hardware differences and parameters comparison

Spread the love

The detailed hardware configuration table and parameter comparison of these four models are shown in the following table.

小米各机型参数对比2

Xiaomi AX1800 least worth buying, because there is Redmi AX6, this price do not need to consider, directly under the order Redmi AX6 can be.

Xiaomi AX3600 all are more balanced, and there is easy access to the AIoT antenna of Mi smart products, the price of $ 90 is not expensive. If you do not need 2.5G network port, and like Xiaomi’s stuff, this one is strongly recommended.

AX6000 well, you need 2.5G network interface to buy, the needs and budget are matched, buy on the line. The advantage is that in these four Xiaomi routers, it has the strongest 5G signal. Why?

It uses the same QCN9024 and QPF4588 as the AX9000, but the tri-band AX9000 needs to join the dielectric filter, a side effect of this component is to cause signal attenuation, attenuation is not much, the way to compensate Either replaced with a higher power FEM chip, or in the software to adjust the power, the former is better, the latter will affect the EVM, resulting in speed QAM instability, resulting in the rate of instability and thus also affect the wireless speed.

The simple wireless speed measurement when disassembled, AX9000 low frequency 5G and AX6000 and distance is not obvious.

AX9000 well, Xiaomi AX6000 shortcomings it has solved, but also an additional 5G chip, the cost is an additional $ 70. The same hardware configuration, you can not buy cheaper than Xiaomi, there is no entanglement!

QCN5054 is not a complete wireless chip, some of its performance needs to have by the CPU to decide, while QCN9024 is a complete wireless signal.

Everything I said above is based on hardware parameters.

Leave a Reply

Your email address will not be published. Required fields are marked *