Pc Diy

Jonspo c3 plus installation show

Please follow and like us:


A mainframe installed for colleagues can meet the needs of daily office and entertainment. The platform is i5-8400 + Z370 + GTX 1060. considering that the expansion chassis has chosen C3 Plus of M-ATX, which increases the back line space while maintaining the cost-effective advantage of the previous version, the new product fortress 240 RGB of Kyushu fengshen is selected in terms of heat dissipation, and magic ring 120 RGB fans are selected to realize the overall lighting effect together. in order to provide power quality and clean routing, The power supply of ANTIKE HCG 750 Gold module was selected. This time, the solid-state disk was selected as PUCOTT M9PeY 256G PCIe. PCI was installed in a very convenient way. The heat sink provided by the device ensured the heat dissipation performance and added light effect.

The installed demand is as follows:
1. Sex can be used to meet the needs of daily office work, audio and video entertainment, post-processing of photos and smooth eating of chicken with medium quality.
2. The appearance is as simple as possible, and there can be some light pollution.
3. The expansion capability is better and can meet the requirements of increasing memory and storage in the later period.

Configuration list:

Cpu Intel i5-8400
Main board Hua Qing Z370M Pro4
Memory Ying Chi Gamer 2 Generation DDR 43008G X2
solid state drives Pocket m9pey 256g pcie
Graphics Asus dual-geforcegtx1060 – o6g
Radiator Kyushu fengshen fortress 240 RGB
Fan Kyushu fengshen magic ring 120 RGB
Chassis Josebe C3 Plus
Power supply Antique HCG 750 Gold

Out of the box

Intel i5-8400。

Yingchi Gamer 2 Generation DDR4 3000 8G x 2, with good cost performance.

The heat sink has been redesigned and its texture is not bad.

Compared with the first generation of products, the second generation supports the seven-color breathing light effect.

Hua Qing Z370M Pro4 can be said to be the Z370 mainboard with the highest cost performance, meeting the basic usage requirements.

Pocket’s M9PeY 256G PCIe, PCI slot design, supports NVMe standard, and the heat sink covering the entire PCB surface provides efficient heat dissipation capability.

The back is clean.

The top also adapts to the trend by adding RGB light bands.

The graphics card is ASUS DUAL-GeForce GTX1060-O6G. The white heat dissipation cover is more in line with the color matching of this installation.

On the back of the graphics card, there is no back plate, and you can see the dense components.

Fort 240 RGB integrated water-cooled radiator.

The newly designed water cooling head has a mirror design at the top, which supports RGB lighting effects and can synchronize with the motherboard lighting software.

240mm water cooling row.

The built-in fan, the version with larger wind pressure, does not support RGB light effect.

In order to achieve better lighting effect inside the chassis, the magic ring 120 RGB fan is also selected.

Antique’s new HCG 750 gold medal module power supply, all-day capacitor, intelligent temperature control, 10 – year warranty, the whole machine will continue to serve after upgrading.

Air inlet side of power supply.

Logo and model on the side.

At the back of the power supply, besides the power interface and switch, there is also a fan operation mode switch.

Module interfaces are abundant.

Josebe C3 Plus has a similar structure to RM3, but with 240mm cold row support, it is very cost effective.

Installed show

Install the CPU.

Install memory.

Install the video card.

Solid – state drives can also be plugged directly into PCI-E slots just like graphics cards.

Look directly at the final installation effect.
45 angle of view.

The front of the chassis is very simple, without any openings and redundant design.

The back of the chassis has a conventional power supply lower structure.

The upper part is the rear exhaust fan and the main board interface.

PCI slot.

The power supply bit at the bottom.

Chassis nameplate.

The chassis front power switch, audio interface and USB 3.0 interface are located on the lower left side of the chassis.

Tempered glass side panels and warning signs.

JONSBO logo on the front panel of the chassis.

At the top of the cabinet, there was originally a 14cm exhaust fan.

The right side of the chassis is provided with an air inlet.

Treatment of joints.

At the bottom of the chassis, a large mesh is opened, and at the same time, a magnetic dust-proof net is installed.

Details of chassis foot pad.

Remove the side panel and look at the side of the chassis. The inside is quite regular.

In the back part, the cable looks neat after being combed.

The back of the mainboard has a large opening area, so there is no problem in replacing the radiator.

Details of the route.

Power bit.

Hard disk bit.

Water cooling head, excellent mirror effect.


Front 240mm cold row and air inlet fan.

The rear exhaust fan.

The arrangement of water cooling pipes will not affect the lamp efficiency.

The length of the video card is just right and does not conflict with the front cold row.

Solid state disk part, the top of the lamp belt is not blocked.

Light show

Overall lamp efficiency after power – on.

The radiator water-cooling head defaults to RGB colorful light effect after being powered on. The light is emitted from the mirror surface and the effect is very good.

Memory light.

Solid state disk top lamp with lamp effect.

The efficiency of the fan lamp is relatively uniform due to the adoption of light guiding blades.

Performance test

CPU-Z screenshot.

GPU-Z screenshot.

CINEBENCH R15.0 Test Results, OpenGL 159.79fps, CPU 987cb.

Proctor M9PeY 256G PCIe performance test.

3DMark Time Spy scored 4433 and graphics card scored 4272.

3DMark Fire Strike Extreme scored 5688 and graphics card scored 5946.

Configuration information.

Master Lu scored 299,726 points for entertainment.

Certification of chicken eating.

AIDA64 + FurMark Double Copy Test, CPU Temperature About 46 ℃, GPU Temperature About 67 ℃.


Comment here